HM-559 is general purpose sealing hot melt adhesive designed
for sealing of corrugated paperboard boxes and folding cartons.
HM-559 can be widely suitable for different hot-melted equipments,
especially suitable for manual sealing operation.
Technical Data
Composition: Synthetic resin
Appearance: yellow particle
Toxicity: none
R&B softening point: approx. 114°C
Brookfield viscosity: 120ºC--------7300 mps
140ºC--------3600 mps
160ºC--------1700 mps
180ºC--------850 mps
Open time: 6~10S
Setting time: 0.5~2S
Density: 1.01g/cm3
Application Instructions
Its adhesion performance will be affected by substrates, release paper and application environment, so
trial run is necessary to determine whether the adhesive is suitable.
There should be no dust or oil on the surface of substrates and release paper, also the substrates and
release paper should be treated to constant temperature and humidity before application.
Recommended application temperature:160-170ºC
Application methods: spot spray, etc.
Packaging and Storage
Shelf Life: 12 Months in dry and cool environment
Packaging: 25 Kg/bag
Cleaning:
The residual adhesive can be rubbed off by wooden shovel before it is totally cooled. Cooled glue can be
cleaned with specialized detergent. Applicators can be cleaned with mineral oil at 120ºC, then purged with
hot melt adhesive.
Warnings:
Don't mix the product with other adhesives.
Keep the adhesive containers covered to avoid dust or contamination.
Use it with adequate ventilation to remove any hot melt fumes or vapors that are generated
Wear safety glasses, safety gloves and safety clothes when using hot melt adhesive to avoid scald.
